Wissenschaftliche Veröffentlichungen
Zeitschriftenaufsätze (reviewed) (66)
Zeitschriftenaufsätze (reviewed) (66)
PBF{\hbox-}LB of large{\hbox-}area magnesium WE43 structures surface{\hbox-}enhanced by plasma electrolytic oxidation
Progress in Additive Manufacturing / Special Issue: RapidTech
9
683-694
2024
Additive Manufacturing of Ti-6Al-4V with laser-wire DED and local shielding gas protection
Procedia CIRP
124
254-256
2024
Investigation of a hyperspectral Scanning Laser Optical Tomography setup for label-free cell identification
Scientific reports
1
14
17861
2024
Laser hot-wire cladded gear preforms for the Tailored Forming process chain
Procedia CIRP
124
673-677
2024
Welding between confinements as a new approach for high deposition rate additive manufacturing with laser-assisted double wire welding with nontransferred arc
Journal of Laser Applications
1
36
2024
Additive manufacturing between cooled confinements with the LDNA process
Journal of Laser Applications
4
36
042053
2024
Ultrasonic levitation as containerless handling for in-space manufacturing
Proc. SPIE 13005, Laser + Photonics for Advanced Manufacturing (SPIE Proceedings Volume 13005, Laser + Photonics for Advanced Manufacturing)
130050C
2024
Development of Ternary Magnesium Alloys for Laser Powder Bed Fusion: Optimizing Oxide Layer Thickness
Advanced Engineering Materials
2401322
2024
Investigation of laser wire bonding for the fabrication of tensegrity structures
Procedia CIRP
124
388-393
2024
Tensile strength of specimens manufactured using laser wire bonding
Journal of Laser Applications
4
36
2024
Tensile strength of specimens manufactured using laserwire bonding
Journal of Laser Applications
4
36
042015
2024
Transient opto-thermal simulation analysis and experimental validation of LERP systems
Journal of Optics
12
26
125402
2024
Design of Additive Manufactured Glass Components for Glass Point Fixings
Proceedings of the 9th Challenging Glass Conference
9
2024
Laser remelting of regolith in vacuum: Reducing porosity for enhanced lunar resource utilization
Procedia CIRP
124
494-498
2024
Oxygen-free production: Influence of silane-doped atmosphere on porosity and mechanical properties of Ti-6Al-4V processed by PBF-LB
Procedia CIRP
124
110-113
2024
Temporal power modulation in high power laser beam welding of round bars
Procedia CIRP
124
438-441
2024
Mechanisms of Increasing Weld Depth during Temporal Power Modulation in High Power Laser Beam Welding
Advanced Engineering Materials
2401386
2024
Single-Layer Laser-Based Powder Bed Fusion of Lunar Regolith Simulants in Vacuum as a First Step to Direct Additive Manufacturing on the Moon
RTe Journal
2024
Influence of Ambient Pressure on Laser Beam Melting of Lunar Regolith Simulant
Acta Astronautica
228
2024
Laser-induced plasma formation in water with up to 400 mJ double-pulse LIBS
Plasma Sci. Technol.
1
26
015506
2024
Double-pulse LIBS in water with up to 600 bar hydrostatic pressure and up to 150 mJ energy of each pulse
Spectrochim. Acta. B.
213
106877
2024
UV-A-laser or UV-C irradiation combined with bacteriophage treatment to combat Campylobacter jejuni on chicken breast fillets
Innovative Food Science & Emerging Technologies
95
103740
2024
Imperfect refractive index matching in scanning laser optical tomography and a method for digital correction
Journal of Biomedical Optics
6
29
15
2024
Optimization of manufacturing strategies in Laser Powder Bed Fusion of Ti-6Al-4V for graded gyroid lattices focusing on dimensional accuracy
13th CIRP Conference on Photonic Technologies
Vol. 124
114-117
2024
Characterization of laser-induced surface structures of aluminum in an oxygen-free atmosphere
Procedia CIRP
124
684-687
2024
Space radiation testing and thermal cycling of functionally coated Alexandrite laser crystals
Optical Materials Express
7
14
1803-1821
2024
Organizing Scientific Knowledge from Engineering Sciences Using the Open Research Knowledge Graph: The Tailored Forming Process Chain Use Case
Data Science Journal
23
2024
Numerical simulation approach for Laser Melting of lunar regolith using an enthalpy-based model
Procedia CIRP
124
347-351
2024
Comparing the laser-induced damage distribution in POFs with raytracing simulations
Optical Materials Express
Issue 5
Vol. 14
1430-1445
2024
Polymer-based 3D printing of function-integrated optomechanics – design guidelines and system evaluation
Rapid Prototyping J. (Rapid Prototyping Journal)
11
30
247-259
2024
Advancing laser transmission welding for additive manufacturing: A study of glass fiber reinforced polypropylene parts
Journal of Laser Applications
4
36
042011
2024
Viscosity effects and confined cochlea-like geometry in laser-induced cavitation dynamics
Appl. Phys. B-Lasers O.
28
130
2024
Acoustic stimulation of the human round window by laser-induced nonlinear optoacoustics
Scientific reports
1
14
8214
2024
Utilizing a dual nozzle system for notch generation in an underwater laser ablation process
Procedia CIRP
124
763-767
2024
Observation of Gravitational Waves from the Coalescence of a 2.5–4.5 M ⊙ Compact Object and a Neutron Star
The Astrophysical Journal
2
970
L34
2024
Search for Gravitational-lensing Signatures in the Full Third Observing Run of the LIGO–Virgo Network
The Astrophysical Journal
2
970
191
2024
Search for Eccentric Black Hole Coalescences during the Third Observing Run of LIGO and Virgo
The Astrophysical Journal
2
973
132
2024
Ultralight vector dark matter search using data from the KAGRA O3GK run
Physical Review D
4
110
042001
2024
Search for Gravitational-wave Transients Associated with Magnetar Bursts in Advanced LIGO and Advanced Virgo Data from the Third Observing Run
The Astrophysical Journal
1
966
137
2024
A Joint Fermi-GBM and Swift-BAT Analysis of Gravitational-wave Candidates from the Third Gravitational-wave Observing Run
The Astrophysical Journal
2
964
149
2024
Deep penetration welding of brass with subsequent wire filling process by laser beam with combined core and ring beam
Procedia CIRP
124
399-402
2024
Production and Forming of Deposition-Welded Hybrid Multimaterial Shafts
Advanced Engineering Materials
11
2024
Multiphysics modelling of wire-based directed energy deposition process with experimental validation
Int. J. Adv. Manuf. Technol. (The International Journal of Advanced Manufacturing Technology)
2024
Ultrasonic Levitation as a Handling Tool for In-Space Manufacturing Processes
Journal of Manufacturing Science and Engineering
12
146
2024
Influence of NIR-laser radiation on the underwater arc welding process with flux-cored wire
Procedia CIRP
124
378-382
2024
Additive Manufacturing of Strip-Loaded Thin-Film Lithium Niobate Waveguides by Means of Two-Photon Polymerization
Proceedings of the 25th European Conference on Integrated Optics (ECIO)
545-551
2024
Laser Weed Management: Development of an experimental protocol to ensure reliable dose-response analysis
DGG-Proceedings
12
Vol. 12
1-6
2024
Investigations on opportunities and challenges of brilliant high-power laser beam welding with 24 kW and adjustable power distribution for different materials
Journal of Laser Applications
4
36
042063
2024
Investigation of Laser-Induced Cavity and Plasma Formation in Water Using Double-Pulse LIBS
Physics
1
6
108-122
2024
Investigation of the detection limits for zinc and copper in brass alloys at water pressures of up to 600 bar using double-pulse LIBS
Procedia CIRP
124
616-620
2024
Experimental investigations on the formation of boundary layersin glass{\hbox-}based additive manufacturing of fused silica fibers by Laser Glass Deposition
The International Journal of Advanced Manufacturing Technology
135
1753-1766
2024
Experimental Investigation on the Surface and Volume Homogeneity ofAdditive Manufactured Fused Silica Components in the Laser GlassDeposition Process
Procedia CIRP
124
275-278
2024
Laser Glass deposition of single-mode glass fibers for the fabrication of chip-scale photonic circuits
Procedia CIRP
124
484-488
2024
Ultrashort pulse laser micro processing strategies for fast beam deflection with acousto-optical deflectors
Procedia CIRP
124
712-715
2024
Active-mixing printhead for on-the-fly composition adjustment of multi component materials in Direct Ink Writing
Additive Manufacturing Letters
10
100217
2024
Surface treatment of additively manufactured stainless steel 316L lattice structures by plasma electrolytic polishing
Procedia CIRP
124
669-672
2024
Investigation of an alternative method for hydrogen content measurement during laser beam welding under water
Procedia CIRP
124
522-525
2024
Detection of diffusible hydrogen during laser beam welding under water
Procedia CIRP
124
544-548
2024
Enhancing flexographic printing process with laser-induced microstructured printing forms for adjustable material transfer
Procedia CIRP
124
634-638
2024
Selective Lethal Impact of Blue Laser Radiation Compared to High-Power LED Irradiation on Naturally Grown Biofouling in the Context of Underwater Biofouling Cleaning
Procedia CIRP
13
124
696-699
2024
Improved Performance of Frequency Tripling Mirrors: A Promising Approach for Simple and Efficient Third Harmonic Generation
EPJ Web of Conferences
307
04076
2024
Zeitschriftenaufsätze (non-reviewed) (33)
Zeitschriftenaufsätze (non-reviewed) (33)
Anti-reflection coating of laser-ablated sub-wavelength structure for millimeter-wave alumina filters
Proc. SPIE 13102, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XII
131021Z
2024
Re-use – Laser Cutting of Semi-finishedThermoplastic CFRP Parts for Better Resource Efficiency
Proceedings of the 7th International Conference & Exhibition on Thermoplastic Composites (ITHEC)
7
175-178
2024
Multimodal imaging of bacterial species for label-free classification
Proc. SPIE 12854, Label-free Biomedical Imaging and Sensing (LBIS)
128540A
2024
Mosquito-dispensed waveguides in cavities on 3D-MIDs
Proceedings of the 15th International Congress Mechatronic Integration Discourse (MID)
2024
A Novel Approach on Efficient ThermoplasticComposite Repairs – The ThermoRep3D Project
Proceedings of the 7th International Conference & Exhibition on Thermoplastic Composites (ITHEC)
2024
Prozessstabilisierung beim Laserstrahlschweißen von Rundstangen unten Anregung durch Ultraschall
Tagungsband 24. Umformtechnisches Kolloquium Hannover
45-46
2024
Laser ablated subwavelength structure antireflection coating on an alumina lens
Proc. SPIE 13102, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XII
131020E
2024
Optimizing fiber component manufacturing by observing the modal composition and PER in real-time
Proc. SPIE 12866, Components and Packaging for Laser Systems X (Proc. 12866, Components and Packaging for Laser Systems X)
1286606
2024
Prototype model of a 100W optical fiber amplifier for 10-channel WDM satellite communication in the 1µm wavelength range
Proc. SPIE 12877, Free-Space Laser Communications XXXVI
128770H
2024
Deep ultraviolet spectral photometry investigation of optical components under vacuum and nitrogen purge conditions
Proc. SPIE 13021, OPtical Fabrication and Testing VIII
130210I
2024
High-power single-frequency depressed-cladding, confined-doping Yb3+ fiber amplifier
Proc. SPIE 12865, Fiber Lasers XXI: Technology and Systems
1286513
2024
Quality-assured laser transmission welding of additively manufactured components with the support of an expert system
Proc. SPIE 12878, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XIII
1287808
2024
Formschlüssiges Laserstrahlschweißen der Mischverbindung aus Stahl und Aluminium für betriebsfeste Halbzeuge im Schiffbau
Tagungsband Statustagung maritime Technologien
255-265
2024
Investigations on laser beam welding of thick dissimilar joints of steel and aluminum with two intersecting laser beams and additional material
Proceedings of the 43rd International Congress on Applications of Lasers and Electro-Optics (ICALEO)
2024
In-process control of penetration depth for welding of dissimilar joints of steel and aluminum with two intersecting laser beams
Proceedings of the 43rd International Congress on Applications of Lasers and Electro-Optics (ICALEO)
2024
3D printed alumina as a millimeter-wave optical element
Proc. SPIE 13102, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XII
131022N
2024
Innovative Therapie der Spinalkanalstenose mittels Laserablation unter OCT-Kontrolle“ (InTherSteLa)
F.O.M - Konferenz Tagungsband
2024
PulseEye - Berührungslose Messung der okularen Gefäßpulswelle für eine reproduzierbare Tonometrie
F.O.M - Konferenz Tagungsband
26
2024
Investigating the treatment point of plants for laser weeding
Proc. SPIE 12879, Photonic Technologies in Plant and Agricultural Science
1287905
2024
Recent advancements in standardization effort for laser-induced damage threshold testing
Proc. SPIE 13020, Advances in Optical Thin Films VIII
94-100
2024
Functional optical coatings with quantum nanolaminates prepared by ion beam sputtering technology
Proc. SPIE 13020, Advances in Optical Thin Films VIII
76
2024
Partial lens refilling to preserve lens accommodation after cataract surgery
Proc. SPIE 12824, Ophthalmic Technologies XXXIV
1282409
2024
Integrable thin-film Fabry-Pérot type electro-optic modulator
Proc. SPIE 13020, Advances in Optical Thin Films VIII
130200E
2024
Monolithic femtosecond holmium fiber MOPA system at 2050 nm
SPIE Proceedings 13003: Fiber Lasers and Glass Photonics: Materials through Applications IV (SPIE Proceedings Vol. 13003: Fiber Lasers and Glass Photonics: Materials through Applications IV)
130030A
2024
Thermal aberration analysis in Nd:YVO4
Proc. SPIE 12864, Solid State Lasers XXXIII: Technology and Devices
128640M
2024
Towards megawatt peak power: advancements and future scaling prospects of ultrafast thulium-doped fiber Mamyshev oscillators
Proc. SPIE PC12865, Fiber Lasers XXI: Technology and Systems
PC1286507
2024
Transfer functions of thulium-doped fiber amplifiers
Proc. SPIE PC12865, Fiber Lasers XXI: Technology and Systems (SPIE Proceedings Volume PC12865, Fiber Lasers XXI: Technology and Systems)
PC128650H
2024
Thermal evaluation of a laser microdrilling process for thin CFRP-laminates
Proc. SPIE 12878, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XIII
128780H
2024
Thermal evaluation of a laser microdrilling process for thin CFRP-laminates
Proc. SPIE 12878, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XIII
128780H
2024
Charakterisierung von Partikelemissionen bei der Materialbearbeitung mit Ultrakurzpulslasern
Tagungsband Experimentelle Strömungsmechanik
2024
Efficient Third Harmonic Generation in Frequency Tripling Mirrors
Proceedings of the Conference on Lasers and Electro-Optics/Pacific Rim
Th2B_1
2024
Konferenzbeiträge (109)
Konferenzbeiträge (109)
Demonstration of IR absorptive filters using alumina with laser ablated anti-reflection subwavelength structures for ground-based CMB polarization telescopes
The Physical Society of Japan Spring Meeting (JPS)
18.-21. März
online
2024
Demonstration of IR absorptive filter using alumina with laser ablated sub-wavelength structure for millimeter-wave alumina filters
SPIE Astronomical Telescopes + Instrumentation
16.-21. Juni
Yokohama
2024
Development of IR-absorptive alumina filter with laser-ablated motheye anti-reflection coating for ground-based CMB polarization telescopes
79th Annual Meeting of The Physical Society of Japan
16.-19. September
Sapporo
2024
Optical thin film design optimization for nonlinear response
SPIE Optical System Design
07.-12. April
Straßburg
2024
Optical thin film design optimization for nonlinear response
SPIE Optical Systems Design
07.-11. April
Straßburg
2024
Novel fabrication method for frequency tripling mirrors in ultrafast laser applications
SPIE Optical Systems Design
7.-12. April
Straßburg
2024
Novel fabrication method for frequency tripling mirrors in ultrafast laser applications
SPIE Optical Systems Design
07.-12. April
Straßburg
2024
Novel fabrication method for frequency tripling mirrors in ultrafast laser applications
SPIE Optical Systems Design
07.-11. April
Straßburg
2024
Additive Manufacturing of Ti-6Al-4V with laser-wire DED and local shielding gas protection
13th CIRP Conference on Photonic Technologies (LANE)
16. - 19. September
Fürth
2024
Additive Manufacturing of Ti-6Al-4V with laser-wire DED and local shielding gas protection
13th CIRP Conference on Photonic Technologies (LANE)
15.-19. September
Fürth
2024
Application of multi-frame super-resolution forScanning Laser Optical Tomography
Focus on Microscopy
24. März
Genua
2024
Lokale Anpassung von Werkstoffeigenschaften an Umformrohlingen durch Auftragschweißen zur Erzeugung gradierter hybrider Bauteile
Umformtechnisches Kolloquium Hannover (UKH)
13.03.2024
Garbsen
2024
Laser hot-wire cladded gear preforms for the tailored forming process chain
13th CIRP Conference on Photonic Technologies LANE 2024
18. September
Fürth
2024
Laser hot-wire cladded gear preforms for the tailored forming process chain
13th CIRP Conference on Photonic Technologies (LANE)
15.-19. September
Fürth
2024
Additive Manufacturing between cooled confinements with the LDNA process
International Congress on Applications of Lasers & Electro-Optics 2024
06. November
Hollywood
2024
Lokale Anpassung von Werkstoffeigenschaften an Umformrohlingen durch Auftragschweißen zur Erzeugung gradierter hybrider Bauteile
Umformtechnisches Kolloquium Hannover
13.-14. März
Garbsen
2024
Ultrasonic levitation as containerless handling for in-space manufacturing
SPIE Photonics Europe
20. Juni
Straßburg
2024
Investigation of laser wire bonding for the fabrication of tensegrity structures
13th CIRP Conference on Photonic Technologies (LANE)
15.-19. September
Fürth
2024
Tensile strength of specimens manufactured by laser wire bonding
International Congress of Applications of Lasers & Electro-Optics (ICALEO)
06. November
Hollywood
2024
Prototype model of a 100 W fiber amplifier system with enhancedwall-plug efficiency for WDM satellite communication at 1 µm
International Conference on Space Optics ICSO 2024
24. Oktober
Antibes Juan-les-Pins, Frankreich
2024
Neural Network Method for Dielectric Optical Coating Design
11th EPS-QEOD EUROPHOTON Conference
25.-30. August
Vilnius, Litauen
2024
Neural Network Method for Dielectric Mirror Design
Helmholtz AI Conference: AI for Science 2024
12.-14. Juni
Düsseldorf
2024
A broadband silicon vacuum window at the millimeter-wave band using laser-machined sub-wavelength structures
SPIE Astronomical Telescopes + Instrumentation
16.-21. Juni
Yokohama
2024
Re-use – Laser Cutting of Semi-finished Thermoplastic CFRP Parts for Better Resource Efficiency
7th International Conference & Exhibition on Thermoplastic Composites (ITHEC)
09.-10. Oktober
Bremen
2024
Multimodal imaging of bacterial species for label-free classification
SPIE Photonics West: BiOS
27. Januar - 01. Februar
San Francisco
2024
Development environment for a regolith melting process for a lunar flight demonstration mission
Space Resources Week
25.-27. März
Luxemburg
2024
Laser remelting of regolith in vacuum: Reducing porosity for enhanced lunar resource utilization
13th CIRP Conference on Photonic Technologies (LANE)
18. September
Fürth
2024
Laser remelting of regolith in vacuum: Reducing porosity for enhanced lunar resource utilization
13th CIRP Conference on Photonic Technologies (LANE)
15.-19. September
Fürth
2024
X-ray-based Techniques for the Characterization of Polymer Optical Fibers
Specialty Optical Fibers 2024
28. Juli
Québec City Canada
2024
3D Optical Tracks on Functional Surfaces Using the Mosquito Method
MID Summit
23.-24. Oktober
Stuttgart
2024
Ultraschallunterstütztes Laserstrahlschweißen zur Erzeugung umformbarer Mischverbindungen
24. Umformtechnisches Kolloquium Hannover (UKH)
13.03.2024
Garbsen
2024
SFB1153-A3 Ultraschallunterstütztes Laserstrahlschweißen von Rundstangen
CZM-Absolvententag
12. Juli
Clausthal-Zellerfeld
2024
Temporal power modulation in high power laser beam welding of round bars
13th CIRP Conference on Photonic Technologies (LANE)
15.-19. September
Fürth
2024
Single-Layer Laser-Based Powder Bed Fusion of Lunar Regolith Simulants in Vacuum as a First Step to Direct Additive Manufacturing on the Moon
Rapid.Tech 3D
14. Mai
Erfurt
2024
Optimizing fiber component manufacturing by observing the modal composition and PER in real-time
SPIE Photonics West: LASE
27. Januar - 01. Februar
San Francisco
2024
Prototype model of a 100W optical fiber amplifier for 10-channel WDM satellite communication in the 1μm wavelength range
SPIE Photonics West: LASE
27. Januar - 01. Februar
San Francisco
2024
100 W fiber amplifier system with enhanced wall-plug efficiency for WDM satellite communication at 1µm
7th Annual ScyLight Conference
13. Juni
Eindhoven
2024
Miniaturized Substrateless Thin Film Filters for Optics Integration
Workshop: Sputtering for Precision Optics II – Digital Transformation Driven Trends in the Coating Technology
11. Juni
Alzenau
2024
Optimization of manufacturing strategies in Laser Powder Bed Fusion of Ti-6Al-4V for graded gyroid lattices focusing on dimensional accuracy
LANE 2024
15.-19. September
Fürth
2024
Characterization of laser-induced surface structures of aluminum in an oxygen-free atmosphere
13th CIRP Conference on Photonic Technologies (LANE)
15.-19. September
Führt
2024
Flussmittelfreies Laserstrahllöten durch lokale Desoxidation
24. Umformtechnischen Kolloquium Hannover
13.-14. März
Garbsen
2024
Standard methods of light scattering measurement in a wide spectral range
OCLA 2024
16. April
Schweiz
2024
Deep ultraviolet spectral photometry investigation of optical components under vacuum and nitrogen purge conditions
SPIE Optical Systems Design
07.-11. April
Straßburg
2024
How to facilitate 3D printing on the moon
13th CIRP Conference on Photonic Technologies (LANE)
15.-19. September
Fürth
2024
The MOONRISE flight model development for laser melting of regolith on the lunar surface
International Conference on Space Optics (ICSO) 2024
22. Oktober
Antibes Juan-les-Pins, Frankreich
2024
IBS 2000: Ion beam sputtering on large area astronomical optics
SPIE Astronomical Telescopes + Instrumentation
16.-21. Juni
Yokohama
2024
IBS 2000: Large are ion beam sputtering coating machine
SPIE Optical Systems Design
08. April
Straßburg
2024
IBS 2000: Large area ion beam sputtering coating machine
SPIE Optical Systems Design
7.-12. April
Straßburg
2024
IBS 2000: Large area ion beam sputtering coating machine
SPIE Optical Systems Design
07.-11. April
Straßburg
2024
Contamination driven laser-induced damage threshold of optical components in the 1 μm wavelength regime
SPIE Photonics Europe
07.-12. April
Straßburg
2024
Contamination driven laser-induced damage threshold of optical components in the 1 μm wavelength regime
SPIE Photonics Europe
07.-11. April
Straßburg
2024
Development of VUV FEL mirrors and study of damage resistance
SPIE Laser Damage 2024
10. Oktober
San Ramon
2024
High-power single-frequency depressed-cladding, confined-doping Yb3+ fiber amplifier
SPIE Photonics West: LASE
30. Januar - 01. Februar
San Francisco
2024
Quality-assured laser transmission welding of additively manufactured components with the support of an expert system
SPIE Photonics West: LASE
27. Januar - 01. Feburar
San Francisco
2024
Advancing laser transmission welding for additive manufacturing: A study of glass fiber reinforced polypropylene parts
ICALEO 2024
03.-07. November
Hollywood
2024
Formschlüssiges Laserstrahlschweißen der Mischverbindung aus Stahl und Aluminium für betriebsfeste Halbzeuge im Schiffbau
Statustagung maritime Technologien
05. Dezember
Berlin
2024
3D printed alumina as a millimeter-wave optical element
SPIE Astronomical Telescopes + Instrumentation
16.-21. Juni
Yokohama
2024
Utilizing a dual nozzle system for notch generation in an underwater laserablation process
13th CIRP Conference on Photonic Technologies LANE 2024
15-19. September
Fürth
2024
Utilizing a dual nozzle system for notch generation in an underwater laserablation process
13th CIRP Conference on Photonic Technologies (LANE)
15.-19. September
Fürth
2024
A novel phantom for laser surgery in the eye’s vitreous body
Photonics West
28. Januar
San Francisco
2024
PulseEye - Berührungslose Messung der okularen Gefäßpulswelle für eine reproduzierbare Tonometrie
F.O.M.-Konferenz
06. November
Berlin
2024
IGF-Projekt IntTherSteLa - Innovative Therapie der Spinalkanalstenose mittels Laserablation unter OCT-Kontrolle
F.O.M. Jahreskonferenz
06. November
Berlin
2024
Investigating the treatment point of plants for laser weeding
SPIE Photonics West
27. Januar - 01. Februar
San Francisco
2024
Investigating the treatment point of plants for laser weeding
SPIE Photonics West: LASE
27. Januar - 01. Februar
San Francisco
2024
Deep penetration welding of brass with subsequent wire filling process by laser beam with combined core and ring beam
13th CIRP Conference on Photonic Technologies (LANE)
16.-19. September
Fürth
2024
Deep penetration welding of brass with subsequent wire filling process by laser beam with combined core and ring beam
13th CIRP Conference on Photonic Technologies (LANE)
15.-19. September
Fürth
2024
Characterization of the thermal stability of IBS coated substrate free miniaturized filters
SPIE Optical Systems Design
08. - 11. April
Straßburg
2024
Characterization of the thermal stability of IBS coated substrate free miniaturized filters
SPIE Optical Systems Design
07.-11. April
Straßburg
2024
Determining the bandgap dependence of nonlinear absorption in optical quantum nanolaminate coatings
Advances in Optical Thin Films VIII
07.-12. April
Strasbourg
2024
Recent advancements in standardization effort for laser-induced damage threshold testing
SPIE Optical Systems Design
07.-12. April
Straßburg
2024
Progress in standardizing laser-induced damage threshold testing
SPIE Laser Damage 2024
07.-10. Oktober
San Ramon
2024
Recent advancements in standardization effort for laser-induced damage threshold testing
SPIE Optical Systems Design
07.-11. April
Straßburg
2024
Functional optical coatings with quantum nanolaminates prepared by ion beam sputtering technology
SPIE Advances in Optical Thin Films VII
24. Juni
Strasbourg, France
2024
Stability and absorption of quantizing nanolaminates
SPIE Optical Systems Design
07.-11. April
Straßburg
2024
Partial lens refilling to preserve lens accommodation after cataract surgery
SPIE Photonics West: BiOS
27.-28. Januar
San Francisco
2024
Laser Melting of Extraplanetary Rock under Lunar Conditions (LEGUM) - System Progress and First Tests
Lunar Surface Science Workshop
20. August
Online
2024
Laser melting of extraplanetary rock under lunar conditions (LEGUM) - System Progress and First Tests
Space Resources Week 2024
25. März
Luxemburg
2024
Laser Melting of Extraplanetary Rock under Lunar Conditions (LEGUM) - System Progressand First Tests
Space Resources Week
25.-27. März
Luxemburg
2024
Combining two-photon polymerization and inverse design to enable the fabrication of tailored nanophotonic components
811. Wilhelm-Else Hereaus Seminar
02.-05. Juni
Bad Honnef
2024
Additive manufacturing of strip-loadedthin-film lithium niobate waveguidesby means of two-photon polymerization
The 25th European Conference on Integrated Optics (ECIO)
17.-19. Juni
Aachen
2024
Miniaturized thin-film electro-optic modulator for hybrid PICs
The European Physical Society Forum (EPS)
25.-27. März
Berlin
2024
Integrable thin-film Fabry-Pérot type electro-optic modulator
Advances in Optical Thin Films VIII
07.-11. April
Straßburg
2024
Monolithic femtosecond holmium fiber MOPA system at 2050 nm
SPIE Photonics Europe
20. Juni
Straßburg
2024
Beikrautmanagement mit Lasertechnik: Entwicklung eines Versuchsprotokolls für dieDose-Response Analyse durchgeführt an AMARE und ALOMY
56. Gartenbauwissenschaftliche Jahrestagung
28. Februar - 02. März
Braunschweig
2024
Thermal aberration analysis in Nd:YVO4
SPIE Photonics West: LASE
27. Januar - 01. Februar
San Francisco
2024
Investigations on opportunities and challenges of brilliant high-power laser beam welding with 24 kW and adjustable power distribution for different materials
43nd International Congress on Applications of Lasers and Electro-Optics (ICALEO)
04.-07. November
Hollywood
2024
Investigations on laser beam welding of thick dissimilar joints of steel and aluminum with two intersecting laser beams and additional material
International Congress of Applications of Lasers & Electro-Optics (ICALEO)
04. November
Los Angeles
2024
In-process control of penetration depth for welding of dissimilar joints of steel and aluminum with two intersecting laser beams
International Congress of Applications of Lasers & Electro-Optics (ICALEO)
04. November
Los Angeles
2024
Experimental investigation on the surface and volume homogeneity of additive manufactured fused silica components in the Laser Glass Deposition process
13th CIRP Conference on Photonic Technologies LANE
15.-19. September
Fürth
2024
Design of a wire nozzle unit for a coaxial deposition head to manufacture wire bridges
Innovative Product Development by Additive Manufacturing 2024
24. September
Hannover
2024
Laser glass deposition of single-mode glass fibers for the fabrication of chip-scale photonic circuits
LANE 2024
15.-19. September
Fürth
2024
Thermal evaluation of a laser microdrilling process for thin CFRP-laminates
SPIE Photonics West: LASE
27. Januar - 01. Februar
San Francisco
2024
Thermal evaluation of a laser microdrilling process for thin CFRP-laminates
SPIE Photonics West: LASE
27. Januar - 01. Februar
San Francisco
2024
Nonlinear optical effects and their utilization in thin film interference coatings
DPG-Frühjahrstagung
28. Feburar
Greifswald
2024
Surface treatment of additively manufactured stainless steel 316L latticestructures by plasma electrolytic polishing
13th CIRP Conference on Photonic Technologies (LANE)
15.-19. September
Fürth
2024
Geometry-dependent process strategy for support-free manufacturing of hydrogen swirl burner by laser-based powder bed fusion
Workshop Innovative Product Development by Additive Manufacturing
24. September
Hannover
2024
How quantum nanolaminates can revolutionize optical thin film manufacturing
Photonics Lecture
10. Januar
Paderborn
2024
Surface functionalization without knowledge of surfacetopography and chemistry – a versatile approach
25th International Symposium on Laser Precision Microfabrication (LPM)
11.-14. Juni
San Sebastian
2024
Laserbasierte Verfahren zur Optimierung der Wasserstofferzeugung
H2 & KMU Workshop
12. November
Jade Hochschule Wilhelmshaven
2024
Enhancing flexographic printing process with laser-induced microstructured printing forms for adjustable material transfer
13th CIRP Conference on Photonic Technologies
15-19. September
Fürth
2024
Selective lethal impact of blue laser radiation compared to high-power LEDirradiation on naturally grown biofouling in the context of underwaterbiofouling cleaning
13th CIRP Conference on Photonic Technologies (LANE)
19. September
Führt
2024
Selective lethal impact of blue laser radiation compared to high-power LEDirradiation on naturally grown biofouling in the context of underwaterbiofouling cleaning
13th CIRP Conference on Photonic Technologies (LANE)
15.-19. September
Führt
2024
Efficient Third Harmonic Generation in Frequency Tripling Mirrors
Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)
04.-08. August
Incheon
2024
Improved Performance of Frequency Tripling Mirrors: A Promising Approach for Simple and Efficient Third Harmonic Generation
11th EPS-QEOD Europhoton Conference on Solid-State, Fibre, and Waveguide Coherent Light Sources (EUROPHOTON)
25.-30. August
Vilnius
2024
Buchkapitel (0)
Buchkapitel (0)
Bücher (1)
Bücher (1)
Development of a Laser Double-wire Directed Energy Deposition Process for Functionally Graded Materials and In-situ alloying
Hannover : Institutionelles Repositorium der Leibniz Universität Hannover
2024